Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

Resources Welding Articles

Welding Articles

Welding Consumable Storage Topics

The Real Cost of Delayed Cracking
Why Hydrogen Cracking Happens After Welding
Why Proper Welding Consumable Storage Matters for Weld Quality and Fabrication Reliability

Aerospace Welding Topics

Preventing Porosity: The Importance of Consumable Storage in Aerospace Manufacturing
The ROI of Thermal Storage – The "Cost of Quality" in Aerospace Welding
The Zero-Defect Standard: TIG Filler Wire Storage Strategies for Aerospace Welding

Shipbuilding and Marine Welding Topics

How Moisture Exposure Impacts Shipyard Welding Operations
Why NAVSEA Level 1 Storage Matters in Critical Naval Welding
Why NAVSEA Welding Requires Strict Moisture Control

Weldment Preheat and Post Heat Topics

How Improper Preheat Causes Failed Welding Inspections
What Inspectors Look for in Preheat Documentation
How to Improve Welding QA Through Thermal Process Control
Why Thermal Records Matter for Welding QA
Common AWS D1.1 Preheat Mistakes in Fabrication Shops
How to Maintain AWS D1.1 Preheat Compliance
Understanding AWS D1.1 Preheat Requirements
How Improvised Heating Increases Crack Risk
Why Thick Carbon Steel Requires Controlled Preheat
What Causes Hydrogen Cracking in Heavy Fabrication?
How Rapid Cooling Creates Brittle HAZ Zones
Why Uniform Preheat Matters in Structural Steel Welding
How Controlled Preheat Reduces Weld Cracking
The Real Reason Heavy Weldments Fail After Welding
Why Thick Carbon Steel Cracks Without Preheat
How to Document Preheat Compliance
Preheat Requirements Under AWS D1.1
Understanding PWHT Requirements for Pressure Vessels
What Happens When Preheat Is Inconsistent?
How to Reduce HAZ Hardness in High-Strength Steel with Keen Ovens

General Welding Advice and Topics

Welding Processes Safety Intro
Welding Jobs and Your Future
Welding jobs Part II
Welding Rods Explained
Building Experience as a Welder
Building Experience on the Job
Basic Welding Terms
Welding Education
Don't Make the Welding Inspector Mad!
Who Makes the Best Welding Machines
The Welding Processes - A Personal Perspective
First Stints as a Welder - Learning the Ropes

Submerged Arc Welding (SAW) Topics

Advantages and Disadvantages of Fused Bonded and Flux Bonded
The Submerged Arc Welding (SAW) Process
Submerged Arc Welding
Welding Granular Flux
Variations of the Submerged Arc Welding Process
Submerged Arc Flux Overview

Shielded Metal Arc Welding (SMAW) Topics

How to Store Rods Properly
7018 Rods Part 1 & 2
Stick Welding and Shielded Metal Arc Welding
Rod Storage 101: An Old Refrigerator with a Light Bulb is not a Rod Oven
Welding Safety
Proper Storage of 7018 Rods to Prevent Defects Part 1 & 2
Stick Electrodes Overview

Flux-Cored Arc Welding (FCAW) Topics

What is Flux-Cored Arc Welding?
Flux-Cored Wire versus Solid Wire
How Flux-Cored Arc Welding Works
Flux-Cored Arc Welding Techniques
Aspects of Flux-Corect Arc Welding

Metal Inert Gas (MIG) Welding

Mig Welding
Basic Mig Welding Procedures and References
Setting Up A Mig Hobby Shop
Setting Up A Mig Hobby Shop - Part 2
Tools for a MIG Welding Hobby Shop Part 1, 2, & 3

Topics and Advice for Hobby Shop Welding

Tips for the Hobby Welders
Tools for a MIG Welding Hobby Shop Part 1, 2, & 3

Heat Treating and Metallurgical Topics

Heat Treating Introduction Part 1 & 2
How Steel is Made: a Brief Summary of a Blast Furnace
Metallurgy Defined
have questions?

contact our experts

Our staff is available to answer any questions, or locate a Keen distributor in your area.

Give us a call at 1-888-512-2870 or send us a message and our team will be in touch shortly!

*denotes a required field.

Cookie Consent

This website uses cookies or similar technologies, to enhance your browsing experience and provide personalized recommendations. By continuing to use our website, you agree to our Privacy Policy