Nitrogen Purge Ovens

We use the term preheat oven to describe an oven that is used for preheating parts before they are used in some type of application. Most of our preheat ovens are custom-designed according to the specific application being performed by a client. Many processes require the preheating of weldments before they are bonded to some other type of metal. This preheating is required to change the property of the metal part and enable it to be installed onto another part. Our ovens are used in many applications. The K-450TL hatchable oven used on ships is just one example. We have designed ovens for bowl shafts, cylinder heads, cylinder blocks, military tank transmissions and for many other types of parts.

It depends on the application requirements. Many steel components for a variety of industries require preheating to prevent problems in the weld after the job is complete. Keen's custom preheat ovens are an excellent preheating solution to many welding applications. Rather than heat each part at a time, we often have customers that load an oven with many parts at once and leave the oven on all the time. This way they have parts ready whenever they need them, at the right temperature. Each welding application has its own thermal treatment requirements, so be sure to check what is need for your next procedure.

Yes, absolutely. Many of our custom ovens have resulted from client requests to modify an existing oven they have seen on our website, or to one of our standard welding electrode ovens that a client may be using for welding applications. The process usually begins like this: a client finds one of our ovens that has an interior size close to what can accommodate the parts that need to be preheated, and then inquires if modifications can be done. Our engineers get to work to provide suggestions to the client as to what modifications can be done. If the modifications are not suitable, we design a new oven from scratch to fit the users needs.

Yes. Keen's custom oven design process typically begins with a discussion of the various solutions we are able to provide to the client. If the client wants to proceed, we then do a CAD drawing for review that clearly outlines the custom oven design for the client to review.

No. We only manufacture electrical ovens with a maximum  temperature range of 1000°F

Yes. We manufacture our ovens in Louisiana.

Henkel Enterprises, LLC, manufacturer of the Keen brand of welding ovens, flux ovens, and custom preheat ovens has been in business since 1923.